Have you ever found yourself in a situation where you needed to flush twice? What if you could get more water in your toilet and solve your problem for good? Keep reading to learn how to get more water in toilet bowl.
Toilets are all made on the same principle. However, most of them differ from each other. The reason for that is because manufacturers might produce the same toilet parts in a different way. That is some kind of their signature, but also a possible improvement.
Therefore, toilets come in different sizes. The size of toilet matters most of the time when it comes to the water capacity.
Why Would You Need More Water in Toilet Bowl?
Everyone who understands how toilet works will know the answer.
If you try and pour the cup of water in the toilet bowl. You will notice that nothing happened and nothing has changed. But if you pour a gallon of water in the toilet bowl, you will notice that the water is flushed down the toilet bowl.
The reason for that is simple. Because toilet bowl has disposal system that it flushes the toilet only if a lot of water is dropped into the bowl. Such system is made so that water doesn’t get disposed constantly. When we urinate in the toilet bowl, for example.
Bigger toilet bowls require more water for each disposes of human waste. More water means bigger water tanks. If you didn’t know, there are different dimensions of water tanks. When you are going to purchase new water tank for your toilet. You should approximately know which toilet tank dimension would work the best for you.
Is Getting More Water in Toilet Bowl Safe?
Most people worry about their toilets, and it’s normal to ask yourself such question.
Getting more water in the toilet bowl shouldn’t cause any problems. Even if you pour more water than the toilet bowl can handle it, there still won’t be any damage done.
Have ever experienced toilet jam? where water which is disposed of in the toilet water can’t go through. You would have noticed that the water still doesn’t spill into your toilet floor.
The toilet bowl has developed a specific way where water will never be able to overspill. If you wondered where the excess water goes when the toilet bowl is full of water. The answer would be the jets under the toilet rim.
No matter how much water gets into the toilet bowl. There’s no way that the bowl system will get damaged in any way. Even if you have the smallest toilet bowl out there, there is nothing to worry about.
We might be using the toilet on the same principle our ancestors did. But we have developed such useful features that improve the usage of our modern toilets nowadays.
How to Get More Water in Toilet Bowl?
Getting more water in the toilet bowl can sometimes be simple. But other times might require more effort.
Step 1 – Check the water level
The first step would be to open the toilet tank and check how much water is in there actually. When you buy a new toilet water tank and you set it up. You will get to choose the water level.
Water level means how much water will be refilled into the water tank for another use. Most of the time, our water tanks are set to the medium or even low water level.
Step 2 – Find the level setting
It’s always located inside the water tank. Most of the time on the left side.
Every water tank is different. But almost every water tank will have a place in the mechanism which will let you choose the water level. The water level is also known as water capacity each water tank can handle.
Step 3 – Switch the level
If you found the leveler, it’s time to switch it. Switching it to higher setting. It will allow you to get more water in the toilet bowl through water tank.
Keep in mind every water tank has its capacity.
When you switch the setting of the water tank. You will notice that refilling the water into the tank requires a little bit more time. However, flushing the water in the toilet will last longer and be stronger as well.
You can find out more in the below video
Step 4 – Enjoy more water in the toilet bowl
After switching the setting of the water tank, you are able to get more water in the toilet bowl. But only the amount that the setting allows you. Limits are there for a reason.
There is no other way to get more water in the toilet bowl. Reason is that water tank is the place where the water comes from. You’re limited to the highest water capacity of your water tank. However, if that’s not enough, you can always purchase a bigger water tank.
When purchasing bigger water tank, it’s important to make sure it fits in your bathroom as well. Also, whether it’s a water tank that gets placed on the wall, or behind the toilet bowl.
Tips to Prevent Water Tank Overfilling
Water tank gives you the ability to change the water capacity. However, it’s important that you don’t mess anything other inside.
Inside water tank, you will also find the mechanism that keeps the level of water always the same. Usually, there is an air ball, similar to the balloon which moves up as the water fills in the water tank. When the ball reaches its maximum level, the bar it’s attached to closes the water valve.
If you remove the ball, or try and change the system. You would receive even more water in the tank. You might expect it to overfill with water.
I highly recommend you to deal with the allowed water capacity level. And don’t do anything else to the system. If you feel like you need more water, just get a larger water tank.
Conclusion
You shouldn’t feel bad asking how to get more water in the the toilet bowl.
Getting more water in your tank is something that has even been thought by manufacturers. That’s why almost every water tank comes with the possibility to choose water capacity.
Although, keep this in mind. Higher water capacity will require more time for refilling. When flushing water into the toilet.
Also, more water means that you will spend more water in a long run. If you get surprised by the water bill change, that’s due to the water tank.
Although, you shouldn’t sweat it. If it’s something you necessarily need, go for it. However, if your toilet bowl doesn’t require that much water – simply leave it on default. Or in the middle water capacity level.
Leave a Reply